No products in the cart.
Existing customer with system issues?
24/7 helpline +44 (0)1246 828484
£0.00
0
Cart
The P2 Receiver Unit Tester (RUT) is designed for use with the Pinpoint Staff Safety System. It enables maintenance personnel to test the infrared Receiver Units that form part of the system, ensuring reliable operation and peace of mind for all users.
The Badge PIT (Personal Infrared Transmitter) operates as both a PIT and a standard ID badge holder.
The System Supervisor Unit with Data Remote Reporting (SSU) is a PC-based design which is used to monitor the status of all main units in the P2 Pinpoint System (this includes products such as Receiver Units and Addressable Call Buttons).
DescriptionThe P2 Total Over Door Light (TODL) is designed to be positioned on the Data Ring and is configured to respond to a single addressable unit or one of a range of units.
The System Supervisor Unit (SSU) is a PC-based design which is used to monitor the status of all main units in the P2 Pinpoint System (this includes products such as Receiver Units and Addressable Call Buttons).
The Sounder with Selectable Tones is used to audibly alert staff.
The P2 Software Mute Switch is used to mute the current alarm from a Display unit.
The Pinpoint System is powered by a Power Supply Unit (PSU).
The P2 PIT is a Personal Infrared Transmitter to be used by staff to activate the Pinpoint System.
DescriptionThe P2 Mute Unit is used to mute all of the sound from the Sounder line connected to the appropriate unit(s).
DescriptionThe Pinpoint Etherbridge is a device created to connect Pinpoint Systems together and facilitate products such as the Cloud InterfaceUnit or PC Alert.
The Pinpoint System is installed on a ‘data ring’ using special 8-core screened cable.
The P2 Day/Night Unit is used to adjust the level of sound coming from the Sounders on the Pinpoint System.
The P2 Call Button Series provides a way for staff or patients to initiate a call on the Pinpoint system from a static wall mounted point.
The P2 Arm/Disarm Unit is used to arm or disarm units associated with the Pinpoint system.
The P2 Graphical Display uses a large (5 inch) colour graphical display to show active calls on the Pinpoint system.
The Addressable Receiver Unit (ARU) receives the infrared signal sent out by transmitters, such as PITs, and transmits the location and level of call across the system
The P2 Reset Hub is used to reset calls on the Pinpoint system.
The Pinpoint mobile and PC alert apps provide the information you need, where you need it. For more information download the brochure.
The WristPIT is a wrist worn Personal Infrared Transmitter to be used by patients to call for assistance.
The Transmitter Test Station (TTS) provides an enclosed environment to accurately test your Pinpoint Personal Infrared Transmitters (PITs) without interference from other products or interfering with the system.
The Transmitter Test Station (TTS) provides an enclosed environment to accurately test your Pinpoint Personal Infrared Transmitters (PITs) without interference from other products or interfering with the system.
The System Supervisor Unit (SSU) is a PC-based design which is used to monitor the status of all main units in the Pinpoint System (this includes products such as Receiver Units and Addressable Call Buttons).
The 4-line Standard Alphanumeric Display Unit (SADU) incorporates a 4-line by 20 character back-lit white LCD which, when activated, will display up to 32 characters defining the precise location of an incident